Why is there no image after changing the IP? 为何修改IP后无图？

Ariel-Topotek

A: The IP of the DV500 AI Function series can be modified through the console. The previous early version needs to modify three locations, device IP, configuration file IP, and external tracking board IP, and the three IPs are required to be in the same network segment. If there is no external tracking, only modify the first two.

答：DV500系列的ip可以通过控制台修改，之前的早期版本需要修改三个位置，设备IP、配置文件IP、外置跟踪板卡IP，同时要求三个IP同网段。如果没有外置跟踪那只修改前两个。